Hi all, I removed the gas tank from my 74 Javelin and wasn't able to trace where the float wires were hooked on to the tank. I'm ready to re-install the tank but I have two wires danging down from the frame. One is green and one is white. I figure the green attaches directly to the stud sticking out of the float unit. I can't see anywhere that the white wire would connect to. There is no terminal to plug into or any screws to attach it to. Can anyone give me a hand?
Results 1 to 2 of 2
Thread: Gas tank help needed
-
04-08-2005, 07:11 AM #1
Junior Member
- Join Date
- Apr 2005
- Posts
- 1
Gas tank help needed
-
04-12-2005, 12:56 PM #2
Moderator
- Join Date
- Oct 2004
- Posts
- 728
The green wire goes to the main stud on the sender. The white wire should be about 6" long or so and it is a ground. The white wire is soldered to the sending unit main plate and has an eyelet on the other end which connects to the frame with a single sheet metal screw.
.
Reply With Quote
Posting Permissions
|
|
|